Because the wings are stored in a hanger about 80 miles from here I can’t test the roll servo. This servo is part of the Can Bus which interconnects many of the avionics components including the MFD, PFD, autopilot, radios etc. I was able to test most of the other components by putting a 120 ohm terminator pig tail on to the can bus at the right wing root. The result is that most of the red Xs are gone.
Still a bit of work to do on the yaw servo, the fuel pump, and the firewall forward. Progress.
![](http://brucelan.com/wp-content/uploads/2020/06/C83DCE49-E534-4413-8D12-1691D3FBEEB0-1024x768.jpeg)